2023-12-27
When you buy a Luyu Heavy Industry wheel loader, you will first consider the engine of the loader, because the engine is the core part of a loader, but the role of the oil can not be underestimated, the oil can form a lubricating film inside the engine to reduce the wear and friction between the various moving parts. To maintain a good friction fit between components, reduce energy loss, improve engine life and performance. Not only that, the oil also helps cool the engine by absorbing and dispersing heat. This helps maintain the normal operating temperature range of the engine, preventing overheating and reducing the risk of engine damage. So the role of oil can not be ignored, then in the daily work, how should we check and maintain the oil?
Before using Luyu Heavy Industry's wheel loader every day, it is necessary to check the oil level, and the wheel loader must be parked on the level ground, so that the oil level will be more accurate. If the vehicle is parked in the field, it will cause a deviation in the accuracy of the oil level.
If the oil level is checked during the operation, the vehicle needs to stop for 15 minutes to pull the handbrake, so that the oil in the engine is returned to the oil pan, and then check the oil level, extract the oil scale, clean the oil scale surface with wiping paper, re-reset the oil scale, and extract the oil level again. In this way, the oil level of the wheel loader will be more accurate.
If the oil level is checked twice between the upper and lower scales of the oil scale, it means that the oil level of the wheel loader is qualified, if the oil level is not between the upper and lower scales of the oil scale, it is necessary to add or release the oil until the oil level is in the appropriate position.
Note that it is strictly prohibited to run the engine when the oil level is below the lower scale or above the upper scale. Insufficient oil can result in inadequate lubrication, increasing the risk of friction and wear inside the engine. This can reduce engine life and degrade performance. The cooling capacity of the oil is reduced because the oil cannot effectively absorb and disperse heat. This can cause the engine to overheat and damage critical parts.
Excessive oil may lead to oil foaming, which will affect the lubrication performance of the oil. Foamy oils do not provide effective lubrication and increase the risk of friction and wear. Not only that, excess oil can also cause internal engine spatter and leakage under oil, contaminate other critical parts or cause other problems.
Here, as a professional construction machinery manufacturer, Lu Yu Heavy Industry reminds you that you should always pay attention to the oil level of the oil, do a good job of daily inspection and maintenance, and do not covet a temporary ease and cause greater mistakes. Adhering to daily maintenance will make the service life of the wheel loader longer.